1600W PMG $279.99

  • 17 mm stainless steel shaft
  • Custom hub spacer/stabilizer with keyway and bolts for attaching to blade hubs
  • Double nickel and zinc plated 14 rare earth neodymium magnet rotor
  • No brushes to fail or replace
  • Large, heavy-duty bearings in front and back
  • Fits delco bolt patterns
  • 3/8" Diameter bolt holes
  • 1 15/16" on center between mounting holes
  • 5 7/8" OD Width
  • 6 5/16" Tall
  • 10 pounds

Output:

  • 12 volt at 250 RPM shaft speed (appx 6mph wind, depending on blade set used)
  • 24 volt at 490 RPM (appx 15mph wind)
  • 48 volt at 970 RPM (appx 24mph wind)
Back